Smarten Arts & Crafts
is doing the best to beautify your courtyard with all kinds of garden/outdoor fountains, planters, statues and fire pits.
We have strict quality control system for each production process from white body, deburring, painting to packing during the production. Also, Customer’s inspection before shipment is welcomed. We can co-operate with customers’ QC staffs well.
(1) Weight request
(2) The wall of white body should be uniform, the hole and bubble are not acceptable.
(3) Mismatching mould line is not acceptable and the mould line should be thin.
4. 100% QC for the white body before it is sent to next production process.
5. Registering the qualified one and unqualified one and communicate with production office about the problem immediately so that we can adjust and improve the production time.
DEBURRING & POLISHING
1. To explain the quality requirement before polishing & deburring.
(1) Trimming gun can not be put too strong on the mould line and the sand paper specification should be uniform. The visible sanding marks is not acceptable.
(2) Moulding lines should be deburred and polished smooth. Visible marks and bubbles are not acceptable.
2. Assorting the qualified products and unqualified products, the qualified one can be sent to the next process for painting. The unqualified one should be reworked till it is qualified.
3. Registering the qualified one and unqualified one and communicate with production office about the problem immediately so that we can adjust and improve the production time.
SPRAYING & PAINTING
FINAL QC BEFORE PACKING
To check if the products match with the production sample. The unqualified on will be returned to the relative process for rework.
To check if all the requested label, color box, master carton and other accessories are correct. And then request the staffs to packing them carefully.